Maintenance Instructions For Marine Winch Base Operation

1. Do not arbitrarily remove the parts of the tool and then operate it, in addition to affecting the safety of the author, it will also cause the tool to be damaged.

2. If the tool is slightly faulty or cannot achieve the original function after use, it can no longer be used, and it must be checked immediately. Regularly (approximately once a week) check and maintain the tools, add grease (Grease) to the rotating parts such as bearings, and add oil (Oil) to the air motor parts.

3. When using various tools, be sure to follow various safety regulations and instructions for operation.

4. Use appropriate tools for work. Tools that are too large may cause work injuries, and tools that are too small may cause damage to the tools.

5 The inlet pressure at the tool inlet (not the outlet pressure of the air compressor) is generally 90 PSIG (6.2Kg/cm^2), too high or too low will damage the performance and life of the tool.