Products

Turnbuckle For Container Lashing

● Series: container loose parts. ● Material: casting steel. ● Surface treatment: Hot dip galvanized. ● Tension: 500Kn

JIS-KS91A-121 Air Vent Head

● Material: cast iron . ● Standard: JIS, CB . ● Size: DN40~ DN500 . ● Application: ballast tank, water tank, oil tank . ● Type approval: ABS, CCS .

Marine JIS Standard 5K 10k Check Valve

● Standard: JIS. ● Pressure: 5K, 10K, 16k, 20K. ● Size: DN10 ~ DN300. ● Body material: cast iron, cast steel, bronze, stainless steel

Marine Fuel Oil Shut Off Valve

● Standard: JIS. ● Pressure: 5K, 10K. ● Size:DN15 ~DN80. ● Body material: bronze

Marine Cast Steel Isolation Gate Valves

● Standard: GB. ● Size: DN50~DN800. ● Pressure: 1.6~10Mpa. ● Connection: flange or weld

Marine Manual Control Gate Valve

● Type of valve: gat valve. ● Standard: JIS, DIN, AISN, GB, API, ISO. ● Pressure: 0.5Mpa~6Mpa. ● Size: DN10 ~ DN300

Marine Wafer Type Butterfly Valve

● Type: wafer. ● Standard: JIS. ● Size: DN40-DN1200. ● Pressure: 5K/10K

Twistlock Dovetail

● Series: container loose parts . ● Material: cast steel . ● B.L.: 500Kn . ● Certification: ABS, DNV-GL, BV, CCS, RINA etc. .

Cast Steel ISO1161 Container Corner Casting

● Material: Cast steel . ● Surface treatment: Raw or Shop primer . ● Counter parts: twist lock . ● Certification: BV, ABS, CCS… . ● MOQ.:20 SETS .

PP PET Mixed Rope

Material: High tenacity PP multifilament and polyester fibers. Construction: 3 strand, 6 strand, 8 or 12 strands. Type: twist . Specific gravity: 0.97-1.1 depending on proportion.

Marine DIN Cast Steel Gate Valve

● Standard: DIN3352. ● Pressure: PN10-PN160. ● Size: DN40~ DN600. ● Body material: cast iron, cast steel, bronze, stainless steel

150Ton T-head Mooring Bollard

● Material: Ductile cast iron or cast steel . ● Capacity: up to 300T . ● Strong & long lasting designs . ● Standard epoxy coating . ● Easy installation and low maintenance cost .